150Kg Ice Maker Machine

Description

Capacity

• Ice production: approx. 150 kg per 24 hours
  • Rated under standard test conditions (around 20–25 °C ambient and 10–15 °C inlet water)
• Ice storage bin (built‑in): typically 40–70 kg
• Ice type (specify when ordering):
  • Cube ice (full or half dice – most common for bars/restaurants)
  • or bullet ice, depending on model

Ice & Operating Conditions

• Typical cube size (example): about 22 × 22 × 22 mm (varies by manufacturer)
• Performance note:
  • In hotter rooms (30–35 °C) or with warmer inlet water, real output may drop by 20–40%.

Refrigeration System

• Refrigerant: Commonly R404A or R290 (check what is allowed in your country)
• Cooling method:
  • Air‑cooled condenser (most common), or
  • Water‑cooled (less common; needs extra plumbing)
• Compressor: Hermetic refrigeration compressor, typically 700–1,400 W input

Electrical

• Power supply (typical):
  • 220–240 V / 50–60 Hz, single‑phase
  • Some heavy‑duty models may be 380–415 V / 3‑phase
• Total power input: about 0.7–1.5 kW
• Controls:
  • On/Off
  • Automatic level control & bin‑full sensor (stops machine when bin full)
  • Indicator lights (Power / Ice making / Bin full / Fault)

Water Requirements

• Water inlet:
  • Cold water connection, usually ½” or ¾”
• Water pressure: typically 0.1–0.6 MPa (1–6 bar)
• Drain:
  • Gravity drain, usually ¾” outlet
  • Machine must be installed higher than drain point

Construction

• Exterior cabinet: Stainless steel front and sides, plastic trim as needed
• Ice bin interior: Food‑grade ABS or stainless steel
• Insulation: High‑density polyurethane foam around bin
• Door: Front flip‑up or pull‑down bin door
• Feet: Adjustable stainless or plastic legs (about 100–150 mm high)

Dimensions & Weight (approximate)

For a self‑contained 150 kg/day unit:

• Width: ~650–900 mm
• Depth: ~600–800 mm
• Height: ~1,000–1,300 mm (including legs)
• Net weight: approx. 70–130 kg

(Separate head + bin systems can differ in size.)

Features & Safety

• Fully automatic ice‑making cycle with bin‑full shutoff
• Air filter on air‑cooled units (often removable for cleaning)
• Compressor overload and high‑pressure protection
• Corrosion‑resistant evaporator (nickel‑plated or stainless, depending on type)
• Some models include:
  • Self‑cleaning / descaling program
  • Alarm or error indicators

Example short spec for ordering

150 kg/24 h commercial ice maker, cube ice, air‑cooled, built‑in storage bin ~50 kg, stainless steel exterior, R404A or R290 refrigerant, 220–240 V single‑phase, automatic bin‑full shutoff, ½” water inlet, ¾” gravity drain, approx. 0.8–1.2 kW power input.